13 min read

Information technology (IT) applications are rapidly moving from dedicated infrastructure to cloud based infrastructure. This move to cloud started with server virtualization where a hardware server ran as a virtual machine on a hypervisor. The adoptionof cloud based applicationshas accelerated due to factors such as globalization and outsourcing where diverse teams need to collaborate in real time.

Server hardware connects to network switches using Ethernet and IP to establish network connectivity. However, as servers move from physical to virtual, the network boundary also moves from the physical network to the virtual network.Traditionally applications, servers and networking were tightly integrated. But modern enterprises and IT infrastructure demand flexibility in order to support complex applications.

The flexibility of cloud infrastructure requires networking to be dynamic and scalable. Software Defined Networking (SDN) and Network Functions Virtualization (NFV) play a critical role in data centers in order to deliver the flexibility and agility demanded by cloud based applications. By providing practical management tools and abstractions that hide underlying physical network’s complexity, SDN allows operators to build complex networking capabilities on demand.

OpenStack is an open source cloud platform that helps build public and private cloud at scale. Within OpenStack, the name for OpenStack Networking project is Neutron. The functionality of Neutron can be classified as core and service.

In this article by Sriram Subramanian and SreenivasVoruganti, authors of the book Software Defined Networking (SDN) with OpenStack, aims to provide a short introduction toOpenStack Networking. We will cover the following topics in this article:

  • Understand traffic flows between virtual and physical networks
  • Neutron entities that support Layer 2 (L2) networking
  • Layer 3 (L3) or routing between OpenStack Networks
  • Securing OpenStack network traffic
  • Advanced networking services in OpenStack
  • OpenStack and SDN

The terms Neutron and OpenStack Networking are used interchangeably throughout this article.

(For more resources related to this topic, see here.)

Virtual and physical networking

Server virtualization led to the adoption of virtualized applications and workloads running inside physical servers. While physical servers are connected to the physical network equipment, modern networking has pushed the boundary of networking into the virtual domain as well. Virtual switches, firewalls and routers play a critical role in the flexibility provided by cloud infrastructure.

Figure 1: Networking components for server virtualization

The preceding figure describes a typical virtualized server and the various networking components.

The virtual machines are connected to a virtual switch inside the compute node (or server). The traffic is secured using virtual routers and firewalls. The compute node is connected to a physical switch which is the entry point into the physical network.

Let us now walk through different traffic flow scenarios using the picture above as the background. In Figure 2, traffic from one VM to another on same compute node is forwarded by the virtual switch itself. It does not reach the physical network. You can even apply firewall rules to traffic between the two virtual machine.

Figure 2: Traffic flow between two virtual machines on the same server

Next, let us have a look at how traffic flows between virtual machines across two compute nodes. In Figure 3, the traffic comes out from compute node and then reaches the physical switch. The physical switch forwards the traffic to the second compute node and the virtual switch within the second compute node steers the traffic to appropriate VM.

Figure 3: Traffic flow between two virtual machines on the different servers

Finally, here is the depiction of traffic flow when a virtual machine sends or receives traffic from the Internet. The physical switch forwards the traffic to the physical router and firewall which is presumed to be connected to the internet.

Figure 4: Traffic flow from a virtual machine to external network

As seen from the above diagrams, the physical and the virtual network components work together to provide connectivity to virtual machines and applications.

Tenant isolation

As a cloud platform, OpenStack supports multiple users grouped into tenants. One of the key requirements of a multi-tenant cloud is to provide isolation of data traffic belonging to one tenant from rest of the tenants that use the same infrastructure. OpenStack supports different ways of achieving isolation and the it is the responsibility of the virtual switch to implement the isolation.

Layer 2 (L2) capabilities in OpenStack

The connectivity to a physical or virtual switch is also known as Layer 2 (L2) connectivity in networking terminology. Layer 2 connectivity is the most fundamental form of network connectivity needed for virtual machines. As mentioned earlier OpenStack supports core and service functionality. The L2 connectivity for virtual machines falls under the core capability of OpenStack Networking, whereas Router, Firewall etc., fall under the service category.

The L2 connectivity in OpenStack is realized using two constructs called Network and Subnet. Operators can use OpenStack CLI or the web interface to create Networks and Subnets. And virtual machines are instantiated, the operators can associate them appropriate Networks.

Creatingnetwork using OpenStack CLI

A Network defines the Layer 2 (L2) boundary for all the instances that are associated with it. All the virtual machines within a Network are part of the same L2 broadcast domain.

The Liberty release has introduced new OpenStack CLI (Command Line Interface) for different services. We will use the new CLI and see how to create a Network.

Creating Subnet using OpenStack CLI

A Subnet is a range of IP addresses that are assigned to virtual machines on the associated network. OpenStack Neutron configures a DHCP server with this IP address range and it starts one DHCP server instance per Network, by default.

We will now show you how to create a Subnet using OpenStack CLI.

Note: Unlike Network, for Subnet, we need to use the regular neutron CLI command in the Liberty release.

Associating a network and Subnet to a virtual machine

To give a complete perspective, we will create a virtual machine using OpenStack web interface and show you how to associate a Network and Subnet to a virtual machine.

In your OpenStack web interface, navigate to Project|Compute|Instances.

Click on Launch Instances action on the right hand side as highlighted above. In the resulting window enter the name for your instance and how you want to boot your instance.

To associate a network and a subnet with the instance, click on Networking tab. If you have more than one tenant network, you will be able to choose the network you want to associate with the instance. If you have exactly one network, the web interface will automatically select it.

As mentioned earlier, providing isolation for Tenant network traffic is a key requirement for any cloud. OpenStack Neutron uses Network and Subnet to define the boundaries and isolate data traffic between different tenants. Depending on Neutron configuration, the actual isolation of traffic is accomplished by the virtual switches. VLAN and VXLAN are common networking technologies used to isolate traffic.

Layer 3 (L3) capabilities in OpenStack

Once L2 connectivity is established, the virtual machines within one Network can send or receive traffic between themselves. However, two virtual machines belonging to two different Networks will not be able communicate with each other automatically. This is done to provide privacy and isolation for Tenant networks. In order to allow traffic from one Network to reach another Network, OpenStack Networking supports an entity called Router.

The default implementation of OpenStack uses Namespaces to support L3 routing capabilities.

Creating Router using OpenStack CLI

Operators can create Routers using OpenStack CLI or web interface. They can then add more than one Subnets as interface to the Router. This allows the Networks associated with the router to exchange traffic with one another.

The command to create a Router is as follows:

This command creates a Router with the specified name.

Associating Subnetwork to a Router

Once a Router is created, the next step is to associate one or more sub-networks to the Router. The command to accomplish this is:

The Subnet represented by subnet1 is now associated to the Router router1.

Securing network traffic in OpenStack

The security of network traffic is very critical and OpenStack supports two mechanisms to secure network traffic. Security Groups allow traffic within a tenant’s network to be secured. Linux iptables on the compute nodes are used to implement OpenStack security groups.

The traffic that goes outside of a tenant’s network – to another Network or the Internet, is secured using OpenStackFirewall Service functionality. Like Routing, Firewall is a service with Neutron. Firewall service also uses iptables but the scope of iptables is limited to the OpenStack Router used as part of the Firewall Service.

Usingsecurity groups to secure traffic within a network

In order to secure traffic going from one VM to another within a given Network, we must create a security group. The command to create a security group is:

The next step is to create one or more rules within the security group. As an example let us create a rule which allows only UDP, incoming traffic on port 8080 from any Source IP address.

The final step is to associate this security group and the rules to a virtual machine instance. We will use the nova boot command for this:

Once the virtual machine instance has a security group associated with it, the incoming traffic will be monitored and depending upon the rules inside the security group, data traffic may be blocked or permitted to reach the virtual machine. Note: it is possible to block ingress or egress traffic using security groups.

Using firewall service to secure traffic

We have seen that security groups provide a fine grain control over what traffic is allowed to and from a virtual machine instance. Another layer of security supported by OpenStack is the Firewall as a Service (FWaaS). The FWaaS enforces security at the Router level whereas security groups enforce security at a virtual machine interface level.

The main use case of FWaaS is to protect all virtual machine instances within a Network from threats and attacks from outsidethe Network. This could be virtual machines part of another Network in the same OpenStack cloud or some entity on the Internet trying to make an unauthorized access.

Let us now see how FWaaS is used in OpenStack. In FWaaS, a set of firewall rules are grouped into a firewall policy. And then a firewall is created that implements one policy at a time. This firewall is then associated to a Router.

Firewall rule can be created using neutron firewall-rule-create command as follows:

This rule blocks ICMP protocol so applications like Ping will be blocked by the firewall. The next step is to create a Firewall policy. In real world scenarios the security administrators will define several rules and consolidate them under a single policy. For example all rules that block various types of traffic can be combined into a single Policy. The command to create a firewall policy is:

The final step is to create a firewall and associate it with a router. The command to do this is:

In the command above we did not specify any Routers and the OpenStack behavior is to associate the firewall (and in turn the policy and rules) to all the Routers available for that tenant. The neutron firewall-create command supports an option to pick a specific Router as well.

Advanced networking services

Besides routing and firewall, there are few other commonly used networking technologies supported by OpenStack. Let’s take a quick look at these without delving deep into the respective commands.

Load Balancing as a Service (LBaaS)

Virtual machines instances created in OpenStack are used to run applications. Most applications are required to support redundancy and concurrent access. For example, a web server may be accessed by a large number of users at the same time. One of the common strategies to handle scale and redundancy is to implement load-balancing for incoming requests. In this approach, aLoad Balancer distributes an incoming service request onto a pool of servers, which processes the request thus providing higher throughput. If one of the servers in the pool fails, the Load Balancer removes it from the pool and the subsequent service requests are distributed among the remaining servers. User of the application use the IP address of the Load Balancer to access the application and are unaware of the pool of servers.

OpenStack implements Load Balancer using HAProxy software and Linux Namespace.

Virtual Private Network as a Service (VPNaaS)

As mentioned earlier tenant isolation requires data traffic to be segregated and secured within an OpenStack cloud. However, there are times when external entities need to be part of the same Network without removing the firewall based security. This can be accomplished using a Virtual Private Network or VPN.

A Virtual Private Network (VPN) connects two endpoints on different networks over a public Internet connection, such that the endpoints appear to be directly connected to each other.  VPNs also provide confidentiality and integrity of transmitted data.

Neutron provides a service plugin that enables OpenStack users to connect two networks using a Virtual Private Network (VPN).  The reference implementation of VPN plugin in Neutron uses Openswan to create an IPSec based VPN. IPSec is a suite of protocols that provides secure connection between two endpoints by encrypting each IP packet transferred between them.

OpenStack and SDN context

So far in this article we have seen the different networking capabilities provided by OpenStack. Let us know look at two capabilities in OpenStack that enable SDN to be leveraged effectively.

Choice of technology

OpenStack being an open source platform bundles open source networking solutions as default implementation for these networking capabilities. For example, Routing is supported using Namespace, security using iptables and Load balancing using HAproxy.

Historically these networking capabilities were implemented using customized hardware and software, most of them being proprietary solutions. These custom solutions are capable of much higher performance and are well supported by their vendors. And hence they have a place in the OpenStack and SDN ecosystem.

From it initial releases OpenStack has been designed for extensibility. Vendors can write their own extensions and then can easily configure OpenStack to use their extension instead of the default solutions. This allows the operators to deploy the networking technology of their choice.

OpenStack API for networking

One of the most powerful capabilities of OpenStack is the extensive support for APIs. All services of OpenStack interact with one another using well defined RESTful APIs. This allows custom implementations and pluggable components to provide powerful enhancements for practical cloud implementation.

For example, when a Network is created using OpenStack web interface, a RESTful request is sent to Horizon service. This in turn invokes a RESTful API to validate the user using Keystone service. Once validated, Horizon sends another RESTful API request to Neutron to actually create the Network.

Summary

As seen in this article, OpenStack supports a wide variety of networking functionality right out of the box. The importance of isolating tenant traffic and the need to allow customized solution requires OpenStack to support flexible configuration. We also highlighted some key aspects of OpenStack that will play a key role in deploying Software Defined Networking in datacenters, thereby supporting powerful cloud architecture and solution.

Resources for Article:

Further resources on this subject:

Packt

LEAVE A REPLY

Please enter your comment!
Please enter your name here